Month: February 2021

The Sun emits energy in the form of electro-magnetic radiation that spans from deep ultra-violet through to far infra-red; 70% of the energy that reaches the Earth falls in the visible spectrum. While the ultra-violet portion of this spectrum is mostly shielded by our atmosphere, the remaining portion reaches its surface in the form of visible light (violet through to red) and heat (infra-red). Technology engineered for capturing both the light (visible and invisible) and the heat from the Sun now exists in the form of photo-voltaic cells (commonly known as solar cells) and heat converters respectively.

Photo-voltaic conversion involves the interaction of a photon with an electron inside a semiconductor material to generate electricity. This energy can then be used by any electrical device or transported through the national grid. Thus its transportability, combined with a pre-existing infrastructure to do so makes it a very useful commodity which can be bought and sold.

In general, economically feasibility is maximized for individual and remote consumers for charging cell-phones, running a radio or lighting in areas such as in a village home or school that has no grid connection. It is an ideal solution for access to electricity in rural areas in Bangladesh that are not yet connected to the national grid.

We have the engineering skill set to design and supply a turn-key solution as well as the practical experience to meet all your PV based solar power needs. Along with our local and global partners, we strive to find most cost-effective yet customized solutions for our customers. We can provide this as a stand-alone engineering service or package it as part of a larger scale new sub-station project where there is mandatory requirement for 10% provision of solar power.

Among our recent sub-station projects where in a government run hospital has involved the installation of solar power system to run fans and lights at an in-patient ward.

Our BBT partner is NAXSO from Italy. NAXSO has supplied BBT to over 300 projects in Bangladesh. NAXSO Sandwich is a modern busbar designed to guarantee high performances in a small dimension product.

High performances are due to the design that is simple and easy and due to aluminum alloy that is 1050, the most pure in the range of extruded aluminum alloys and 13% better performing that the traditional 6060. All the housings are metal zinc galvanized and additionally painted so that the protection against aggressive climate and ambient conditions is very high and even electrical performances are assured by the mix of every pure aluminum and very low temperature and power dispersion due to design and housing painting.

Two strong bolts in all the ratings up to 2000A and three bolts up to 4000A as well as five in 5000A make the joints to ensure a long life and constant pressure on all the conductors so that low maintenance is needed. When plug in is required a compact air busbar is made in the NAXSO Sandwich range to give the right balance between ultra-compact design in Feeder range and air compact to ensure good performance to all the tap offs installed and let an easy manufacturing of the busbar tap off up to 630A can be plugged along the busbar and up to 1000A on the joint.

Accessories
Whole lot of accessories to suite the layout plan of buildings, vertical elbows, horizontal elbows, flange ends, combination elbows, reducers, expansion joints etc. are available.

NAXSO Research & Development (R & D)

NAXSO continue to focus on R&D efforts at technology intensive activities that are both commercially viable and protect the environment, thereby enhancing the overall quality of life.

Busduct System or Cable
Cable has long been a traditional means for power distribution in building services. But now with rapid changes in technology occurring daily in the modern industry and commerce, the requirement for an electrical system that can quickly adapt was felt. Busduct is a modern, efficient and cost effective means of providing motive power.

Today’s Busduct trunking provides a convenient and economical means of power distribution. The use of Busduct in recent years has increased and this growth offers the system designers, installers and end-users significant advantages. Henikwon SCM Busduct System has been found to be particularly useful in Construction, Hotels, Hospitals, Factories and others.

Benefits of Busduct
The benefits of using Busduct can be seen in many ways. For starters, costing and estimation of the quantities can be determined quickly and accurately

The compact design allows for easy installation and in many cases, the equipment can be pre-assembled prior to delivery which is very much a time saver.

The fact is that the material cost of Busduct trunking compared to cable is higher. But if the total cost of installation and labor along with time consumed are considered, the balance usually tips in favour of Busduct trunking.

The requirement for manpower during the installation of Busduct trunking is very much less compared to the installation work of cables.

Installation of Busduct is a great time saver compared to the installation of cables. Even during fault finding and maintenance work, Busduct emerges as a clear winner. The location of the faults can be quickly located.

Expensive plant downtime can be kept to a minimum when using bus duct trunking. Protective devices are usually in the form of tap-off units where circuit breakers can be installed. This helps to localize the fault when it occurs.

The availability of Busduct trunking is not a problem since more and more manufacturers are marketing their products in various parts of world. Electrical design with Bus Bar trunking is simpler than with cable because its characteristics are so well defined and documented.
Why NAXSO Sandwich

• Robust Structural Assembly due to self piercing rivets thanks to German AVDEL Technology. The structural resistance in any point of the rivet area is 20 times higher than a welded point.
• Two versions of the housing are available: Metal painted and Aluminum painted. Metal version is giving more tension and structural strength to the busbar and performing better in case of fire as metal has a melting point of around 1500 celsious.
  Aluminum version is giving an excellent earth path and reducing to the lowest level electrical noise and mechanical vibrations. Aluminum is light and can draw out the earth and make the busbar cooler because of the high conductivity Degree.
• NAXSO busbar design has conductors 5 mm thick thanks to latest extrusion technology so that the single conductors are a little higher in dimension and the cooling is higher by 20% than competitors that adopt 6 mm thick conductors.
• To guarantee a high joint stability and performances all the NAXSO sandwich joints have copper tin plated parts to joint bar to bar no matter if the busbar has Aluminum or Copper conductors besides tin plated Copper is totally compatible with Aluminum tinned or not or Copper tinned or not.
• Final bending of conductors is a must in NAXSO sandwich because the very soft bending angle and the minor thickness of conductors makes a springing soft effect that means higher capacity in NAXSO joints to adapt conductors to the joint for a better connection and a lower tension drop in every joint.
• NAXSO conductors 5 mm thick give to final part of the busbar a high springing effect to conductors that are more easy to be adapted to joint design. Thanks to this soft springing effect NAXSO sandwich joints do not need special strong torque and bolt can be closed since 40 newton meter to 70 newton. As well as all competitors need a strong torque that, if loose, compromise the performance of the joint.
• NAXSO sandwich plug in is totally compact no air in any point of the plug in area no extra house in external design. Competitors that use to bend the busbars in joint area have a part of the busbar that is air insulated and so it is not sandwich design so that in three windows busbar three is around total 300 to 600 mm that are air insulated
• Additionally every point where conductors are separated to let the tap off plug in they have 4 bendings in each conductor that means in total 12 bendings per single conductors and total 48 extra bending out of three meter compared to zero bendings in NAXSO plug in design. Every bending is causing very little tension drop and so after hundreds and hundreds of bendings the tension drop of a plug in busbar is totally different from a feeder busbar as well as impedance and all other data.
• Minimum short circuit capacity is as a minimum level 70 KA for 1 second even in lower ratings since 800A and it is 50 KA for 1 second on 400A and 630A

NAXSO lighting busbar is an aluminum extruded very strong and light busbar track with a number of ratings 25-40-63A and assembled tracks mono busbar and double side back to back to en-sure COMPLETE SEGREGATION when needed for safety reasons. NAXSO lighting is the only lighting busbar in the market with six conductors in one housing so that when is double we can offer 6+6 conductors. All NAXSO tap-offs can be wired and connected to all six conductors both with or without fuses and enormous number of choices is offered and all the tap offs are rewirable.
Why NAXSO Lighting Busbar

• Housing is Aluminum made with one extruded unassembled part instead of two. This means an exceptional strength against any “Helix” or “Wave” effect. The busbar is sturdy, rigid and stiff.
• Aluminum body makes the busbar extremely light weight.
• NAXSO lighting busbars have up to 6 conductors capacity plus the conductors are 690 volts. Any circuit can be wired both energy and signal as well as daly and bus controls up to 40 joints (120 MT). All the tap offs have up to 6 pins capacity for every single tap off and the big one (SBM) can even be fused up to 25A.
• Aluminum body means excellent PE conductor 130mm2 around 90 mm2 copper equivalent. No extra PE is necessary. PE housing results in low noise material. The electrical magnetic field is roughly zero.
  
  

For your project quotation with NAXSO Aluminum/Copper Power or Lighting BBT, or for additional information regarding BBT, please contact our office.

	DIESEL GENERATORS          Brand / Origin: Forest City / WellandPower / FG Wilson – UK 20kVA – 2000 kVA Frequency 50Hz Automatic Microcontroller based + manual Start / Stop System Emergency Stop available as protection device Built-in vibration skid for smooth operation Auto Battery Charger (ABC) included Synchronization: available ENGINE: Brand / Origin: Perkins – UK / VOLVO PENTA – Sweden / MTU – Germany Speed: 1500 RPM Induction Induction System: Turbocharged Engine Type: 4 stroke multi cylinder industrial diesel Engine suitable for tropical environment Cooling System: Water cooled (Radiator cooled with engine driven fan) Protection: Over speed, under speed, oil pressure, over heating etc. Fuel Tank: Built in with base ALTERNATOR: Brand / Origin: Stamford / Mecc Alte / Leroy Somer – UK Industrial brushless AC Alternator Phase: 3 Phase Output (Volts): 400/415 volts (Line to line) Cooling: Air cooling Insulation Type: Class “H” Protection: Industrial brushless design screen protected, fan ventilated, drip-proof, self exciting in accordance with IP23 Voltage Regulator: Automatic Voltage Regulator (AVR) Voltage Regulation: ± 1% / ± 1.5% power factor between 0.8 lagging & unity CONTROL MODULE: Brand / Origin: Deep Sea – UK Auto start (AMF) digital control module Operation via push buttons on front panel with STOP, AUTO and MANUAL positions Digital Instruments: Ammeter, Voltmeter, Frequency meter, Run-hour meter, Oil Pressure, Water Temperature Alarm Indicator: Under/Over volts, Under/over speed, Under/Over Frequency, Low Oil Pressure, High Engine Temperature, Fail to start and Loss of speed sensing etc. Load Transfer Time: Adjustable, Delay on start 1-25 sec, Delay on transfer 1-70 sec Engine Cooling Time: 5 minutes maximum Phase Failure Relay: Digital option and control for Main’s upper lower cut off voltage setting and adjustable hysteresis voltage, sensing option etc.
	GAS GENERATORS Please contact our office.
	ACOUSTIC CANOPY Origin: Foreign/Local built – Acoustic Enclosure & Weather Proof Reducing Sound levels to 75 dBA @ 3 meter in open space Air inlet and outlet options at alternator and radiator ends Hinged access doors on either side with locking option Silencer Cable entry gland apertures
	AUTO TRANSFER SWITCH – ATS Origin: Foreign/Local built Supplied in suitable steel enclosure, wall mounted, fuses, magnetic contactor coil, indicators etc. Interlocking: Electrical + mechanical Magnetic Contactor / Motorized switch: 3 Pole Brand of Magnetic Contactor: ABB or Equivalent Auto Voltage Stabilizer (AVS): for protection of coil of magnetic contactor of ATS Paint: Powder coated

---

WARRANTY

We provide manufacturer’s warranty of: 1500 hours or 1 year whichever comes first – effective from date of delivery at client’s site. Warranty policy covers: any manufacturing defects or any premature wear & tear due to usage. Faulty part(s) is/are replaced/repaired within warranty period. Warranty does not cover: improper maintenance by the user, consumable items, servicing by unauthorized person, running the genset above it’s capacity or any unauthorized modification of the genset.

---

INSTALLATION & COMMISSIONING

Includes Carrying, Loading, Unloading, Installation & Commissioning provided genset is installed in Basement or at Ground Floor level within Dhaka City. Not included are cost of commissioning materials, such as: Power/Control Cable, Civil works, Ducting, Manual labor, Silencer pipe Extension Work, Lube Oil, Coolant & any other materials that may be necessary for installation of genset.

---

SPARE PARTS + AFTER SALES SERVICE + AMC

Sufficient stock of spare parts is maintained to meet regular demands of our valued clients. After 12 months warranty period, we extend our support for servicing of gensets at a reasonable charge by entering into an Annual Maintenance Contract (AMC) with our customers. On-call service is available 24/7 to attend to any types of emergencies.