POWDER COATING
As a separate facility within our factory premises and as part of contract manufacturing, we offer powder coating services. Our fully equipped powder coating facility was setup in Jan. 2012. This has enabled us to provide powder coated finish to all our transformers and switchgear panels.
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The coating is applied electrostatically and is then cured under heat to allow it to flow and form a skin. It is usually used to create a hard finish that is tougher than conventional paint.
There are several advantages of powder coating over conventional liquid coatings:
- Powder coatings emit zero or near zero volatile organic compounds (VOC).
- Powder coatings can produce much thicker coatings than conventional liquid coatings without running or sagging.
- Powder coating production lines produce less hazardous waste than conventional liquid coatings.
- Powder coated items generally have fewer appearance differences between horizontally coated surfaces and vertically coated surfaces than liquid coated items.
- A wide range of specialty effects is easily accomplished which would be impossible to achieve with other coating processes.
Our facility is equipped to offer high quality powder coated finish in all color ranges and for a vast array of products. Our test laboratory assures correct color calibration and ensures quality.
CORE SLITTING
As a separate facility within our factory premises and as part of contract manufacturing, we offer Core Slitting Services for CRGO coils. Our fully automated Core Slitting Machine was setup in March 2013. This has enabled us to provide slitting for CRGO coils of any desired widths ranging from 50mm up to 1200mm and with very short lead times. For rates and availability of service please contact our office.
CUT-TO-LENGTH LAMINATIONS
As a separate facility within our factory premises and as part of contract manufacturing, we offer Cut-to-Length Laminations of cores to any desired lengths. Our fully automated Cut-to-Length Machine was setup in March 2013. This has enabled us to provide core laminations of any specified size and shape and with very short lead times. For rates and availability of service please contact our office.
CORE ANNEALING
As a separate facility within our factory premises and as part of contract manufacturing, we offer Core Annealing Services for CRGO laminations. Our fully automated Core Annealing Furnace was setup in August 2013. Passing core laminations through the annealing furnace at 800 degrees Celsius provides improvement in its loss property. Thus transformers built with Annealed cores have lower losses. For rates and availability of service please contact our office.
TANK + RADIATOR MANUFACTURING
With the help of our Fully-Automated Radiator Plant we are able to fabricate the most advanced design transformer tanks with Corrugated Fin-Type Radiators. We can provide Tank + Radiator fabrication as a stand-alone/contract manufacturing service for other transformer manufacturers. For rates and availability of service please contact our office.
